Loading Menu ... or Your browser does not support JavaScript

> Next

Building the 'Sinbad 2 in Germany': Thomas Kaller has built Sinbad 2 in Germany and let me have the pictures shown below. He has done a beautiful job as you can see on the next page where the finished boat is shown at the launching.
Bottom panels joined along the keel ready for unfolding.	Laying the bottom panels into the jig.
Making up the mid bulkheads and dagger board case.	Close up of dagger board case being glued up.
There is a gap in the photographic record, we go straight to a more advanced stage. The hull has been assembled and taped, here a detail of the aft seats.	Mid bulkhead and dagger board case have been installed.
View of mid bulkheads at the time of fitting gunnel laminations.	The bow section with forepeak bulkhead.

Next >

Top of Page