Loading Menu ... or Your browser does not support JavaScript

< Back Next >

Building the 'Samba': Continuing with the build of "Samba".
Having fitted the mast base and socket, the fore deck can be fitted. This is the dry-fit stage. Starting to make up doublers for mast partner and access hatch.	Checking fit of the deck against top of bulkheads and gunnel to ensure good glue up.
A short section of mast tube is used to check alignment and that bearings are free (the mast rotates).	Foredeck is now being glued on and the port side-deck main section is in dry-fit stage.
Side-seat main sections are being glued on next.	A view after all the weights and clamps have been removed.
Seats are now complete with edges rounded and epoxy sealed.	Fitting mid bulkhead stiffeners.

< Back Next >

Top of Page