Loading Menu ... or Your browser does not support JavaScript

< Back Next >

Building the 'Samba': Continuing with the build of "Samba".
Two further gunnel laminations need to be glued on. The gunnel is going to be well rounded and has a hollow underneath.	First chamfer to round off gunnel.
The stem end of the gunnels is cut off square and sanded to receive a capping piece.	Capping piece being glued on - held by a single temporary screw.
Fairing in of capping piece.	Hull has been turned over for glassing of external chines etc.
The entire keel strake and chine is glassed using one piece of glass cloth. After setting up, the dagger board slot has been opened up again.	Hull outside glassed and epoxy sealed.

< Back Next >

Top of Page